Amprobe UAT-610 Underground Utilities Locator Kit
Fast Delivery
Receive in amaizing time
Easy Return
Return policy that lets you shop at ease
Always Authentic Products
We only sell 100% authentic products
Secure Shopping
Your data is always protected
Model: Amprobe UAT-610 Underground Utilities Locator Kit
Amprobe UAT-610 Underground Utilities Locator Kit is the best performing product that is rugged and reliable. Accidentally hitting a support stock during a project can guide to costly repairs and make hazardous public safety situations. Digging in the wrong area can along with a guide to unnecessary delays and costs for your project, and ultimately, your company. Avoid this disruption taking into consideration the rugged and durable Amprobe UAT-600 Series, meant to adroitly pinpoint underground utilities and buried facilities happening to 100 feet deep considering accurate depth measurement to 20 feet.
The locating kit comes conclusive and ready for use following a Transmitter, Receiver, test guide kit, batteries, and new fuses, all in a mobile, protective duffle bag. The UAT-620 kit moreover includes a Signal Clamp for transmitting a signal taking into consideration it is not possible to make electrical entre bearing in mind the cable to be traced. For applications where auditorium deviation locating is required, use the UAT-600 Transmitter in magnetism then the optional A-Frame adjoin.
Main applications
Locate energized 50/60 Hz cables carrying current
Identify the location of all metallic utilities: pipes*, energized and de-energized cables
Trace individual pipes* or cables (energized or de-energized)
*Tracing of non-metallic pipes and conduits is practicable after inserting metal fish autograph album or cable
Three scrutiny modes for broad range of applications
Passive facility mode (50/60 Hz) tracing energized lines conducting current (no Transmitter unpleasant)
Passive radio mode (RF) using surrounding radio waves to smack underground utilities (no Transmitter valuable)
Active mode using UAT-600-T Transmitter
Three lithe modes using the UAT-600-T Transmitter
Induction the Transmitter will automatically launch to radiate a signal approaching it using an internal antenna, used for tracing individual cables where there is no entrance to the heritage to attach test leads or a clamp
Direct relationship following test leads the most obedient method to trace individual cable or a pipe
Clamp (Included in the UAT-620 kit, optional for the UAT-610 kit) provides an efficient and safe method of applying a locate signal to a cable, where it is not feasible/safe to profit entrance to a cable for making an electrical tribute
Special applications
2 frequency options: 8 kHz and 33 kHz
Locate non-metallic pipes and sewer lines
Take severity and current measurements
Measure voltage, resistance and output current
Advanced locating when two people
Locate ground faults bearing in mind than the optional AF-600 A-Frame adjoin
Unparalleled safety
Stop compromising time and safety. What in fact sets the UAT-600 Series apart from supplementary underground locators is its CAT IV 600 V safety rating. This allows you to safely partner the Transmitter directly to an energized pedigree going on to 600 V in a CAT IV setting. Previously, if a crew needed to trace a specific electrical heritage by transmitting a signal through it, the heritage had to be de-energized first, adding taking place period and reducing productivity.
Specifications: Amprobe UAT-610 Underground Utilities Locator Kit
| Features | UAT-600-R Receiver | UAT-600-T Transmitter | SC-600 Signal Clamp (included with UAT-620, optional for UAT-610) |
| Measurement category | CAT IV 600 V | ||
| Operating voltage/current | 0 to 600 V | 0 to 600 V, 100 A max. | |
| Operating frequency/tracing modes | Active tracing: 33 kHz and 8 kHz Passive tracing: 50/60 Hz and Radio |
Energized circuit Induction mode: 33 kHz Direct connection modes: 8 kHz and 33 kHz Clamp mode: 8 kHz and 33 kHz De-Energized circuit Induction mode: 33 kHz Direct connection modes: 8 kHz, 33 kHz, A-Lo/A-Hi A-Frame: 8 kHz Clamp mode: 8 kHz and 33 kHz |
33 kHz and 8 kHz |
| Locating modes | Peak and Null | – | – |
| Depth measurement and accuracy | Up to 20 ft 4 in to 10 ft: pm; 3 % 10 ft to 20 ft: pm; 5 % |
– | – |
| Display backlight | Automatic | Yes | – |
| Audio indication | Increasing closer to the signal | Fast beeps showing the better signal is applied | – |
| Transmitting mode power output | – | Max. 3 watts | – |
| Output voltage | – | Max. 50 V rms | – |
| Output current | – | Max. 250 mA rms, constant current in 5 steps | – |
| Signal voltage output (nominal) | – | – | 23 V rms at 8 kHz 30 V rms at 33 kHz |
| Mains voltage measurement | – | 0 V to 600 V, 50 Hz to 60 Hz Resolution: 1 V Accuracy: pm; 10% |
– |
| Resistance measurement (De-energized circuit) |
– | 0 ohm; to 999 k ohm; Range: 0 ohm; to 999 ohm; (resolution: 5 ohm;) Range: 1 k ohm; to 999 k ohm; (resolution: 1 k ohm;) Accuracy: pm; 10% |
– |
| Output hazardous voltage warning | – | ≥ 30 V rms | – |
| Mains hazardous voltage warning | – | ≥ 30 V rms | – |
| Sensitivity adjustment (gain control) | Yes | – | – |
| Sensitivity at 1 m (typical) | Power: 2 mA Radio: 20 μA 8 kHz: 5 μA 33 kHz: 5 μA |
– | – |
| Display | 4.3 in, 320 x 240 BW outdoor LCD display with auto backlight | LCD display (LED backlight) 2.4 in x 1.3 in |
– |
| Update rate | Instantaneous | Current (mA): 10 ms Voltage (V): 15 ms Resistance ( ohm;): 330 ms |
– |
| Operating temperature and humidity | -4 °F to 122 °F (-20 °C to 50 °C), ≤90% RH | ||
| Storage temperature and humidity | -40 °F to 140 °F (-40 °C to 60 °C), ≤90% RH | ||
| Operating altitude | < 6561 ft (< 2000 m) | ||
| Pollution degree | 2 | ||
| Water and dust resistance | IP54 | ||
| Drop proof | 3.28 ft (1 m) | ||
| Power supply | (6) 1.5 V AA alkaline batteries | (8) 1.5 V D cell alkaline batteries | – |
| Auto power off | 15 minutes idle | – | – |
| Battery life | Approx. 35 hours at 70 °F (21 °C) (Typical) | Approx. 16 hours at 70 °F (21 °C) (Typical) | – |
| Overload protection | – | 600 V rms Fuse FF 500 mA, 1000 V, IR 30 kA, Φ6.3×32 mm |
– |
| Agency approval |      |
||
| Safety compliance | IEC 61010-1, IEC 61010-2-033 CSA/UL 61010-1, CSA/UL 61010-2-033 |
IEC 61010-1, IEC 61010-2-033 CSA/UL 61010-1, CSA/UL 61010-2-033 IEC 61010-031, CSA/UL 61010-031 (test leads) |
IEC 61010-1, IEC 61010-2-033 CSA/UL 61010-1, CSA/UL 61010-2-033 |
| Size (H x W x L) | Approx. 11.9 x 4.7 x 30.7 in (302 x 120 x 779 mm) | Approx. 14 x 9 x 4.7 in (355 x 230 x 120 mm) | Approx. 11.6 x 7.1 x 1.4 in (295 x 180 x 37 mm) |
| Weight | Approx. 4.2 lb (1.9 kg) (batteries installed) | Approx. 7.0 lb (3.2 kg) (batteries installed) | Approx. 1.9 lb (0.85 kg) |
Key Features: Amprobe UAT-610 Underground Utilities Locator Kit
- Multiple tracing modes allow you to locate and trace energized and de-energized utilities in a variety of applications
- The intuitive Transmitter automatically chooses the correct locating function based on the connected accessory and includes selectable 8/33 kHz frequencies
- The Receiver’s high-contrast display allows for clear viewing in full sunlight and features an automatic backlight for shaded and dark areas
- Semi-automatic gain control quickly detects tracing signal and allows precise adjustment of the receiver sensitivity
- Depth measurement up to 20 ft
- Rated CAT IV 600 V, ensuring safety when working with energized cables
- Rugged, durable construction: water and dust resistant to IP54 and drop proof to 3.28 ft (1 m)
- Use the Signal Clamp to induce a signal without making electrical contact (included with the UAT-620)
- Ground fault locating with the optional A-Frame accessory
