Amprobe AT-8020 Advanced Industrial Wire Tracer Kit
Fast Delivery
Receive in amaizing time
Easy Return
Return policy that lets you shop at ease
Always Authentic Products
We only sell 100% authentic products
Secure Shopping
Your data is always protected
Model: Amprobe AT-8020 Advanced Industrial Wire Tracer Kit
The Amprobe AT-8020 Advanced Industrial Wire Tracer Kit Series expected to guard electricians from the most dangerous level of transient overvoltage spikes occurring to 8,000 V known to occur in industrial environments. The Receiver is equipped once patented Smart Sensor technology, which finds and displays the location and orientation of Energized wires in walls, floors, and ceilings regarding the subject of the large color TFT LCD screen.
The Scan and Locate feature favorably identifies the single precise breaker or mingle, eliminating the confusion from incorporation two-timing appreciative readings common in older technology tracing tools. Embedded backing screens make set-happening easy and error comprehensible for novice users and experts alike.
Featuring three facility modes high, low, and loop and two output frequencies (6 kHz and 33 kHz), the AT-8000-T Transmitter incorporates the best technologies within realize for optimal wire tracing and breaker identification harshly both energized and de-energized circuits. The AT-8000-T automatically sets the signal based in a report to the order of detected voltage and prompts the fanatic to set the faculty level based upon the application, delivering consistently accurate results.
The optional CT-400 Signal Clamp for inducing signal into wires without entry to bare conductors is included in the AT-8030 kit.
Specifications: Amprobe AT-8020 Advanced Industrial Wire Tracer Kit
| Features | AT-8000-R Receiver | AT-8000-T Transmitter | CT-400 Signal Clamp (not included) |
| Display size | LCD 3.5 in (89 mm) | LEDs | N/A |
| Display dimensions (W x H) | 2.76 x 2.07 in (70 x 52 mm) | N/A | N/A |
| Display Resolution | 320 x 240 | N/A | N/A |
| Display type | Color TFT LCD | LEDs | N/A |
| Display color | Yes | Operating mode LEDs: red Battery status LEDs: green, yellow, red |
N/A |
| Booting time | 30 sec | < 2 sec | N/A |
| Backlight | Yes | N/A | N/A |
| Operating temperature | -4 °F to 122 °F (-17.77 °C to 49 °C) | -4 °F to 122 °F (-20 °C to 50 °C) | 32 °F to 122 °F (0 °C to 50 °C) |
| Operating humidity | 45%: -4 °F to <50 °F (-20 °C to <10 °C) 95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to 122 °F (40 °C to 50 °C) |
45%: -4 °F to <50 °F (-20 °C to <10 °C) 95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to 122 °F (40 °C to 50 °C) |
95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to <122 °F (40 °C to <50 °C) |
| Storage temperature and humidity | -4 °F to 158 °F (-20 °C to 70 °C), <95% RH | -4 °F to 158 °F (-20 °C to 70 °C), <95% RH | -4 °F to 140 °F (-20 °C to 60 °C), <95% RH |
| Operating altitude | 0 to 6561 ft (2000 m) | ||
| Transient protection | N/A | 8.00 kV (1.2/50μS surge) | N/A |
| Pollution degree | 2 | ||
| IP rating | IP 52 | IP 40 | |
| Drop test | 3.28 ft (1 m) | ||
| Power supply | 4 x AA (alkaline) | 8 x AA (alkaline) | N/A |
| Power consumption (typical) | 4xAA battery: 2W | Hi mode: 70 mA Loop mode with Clamp: 90 mA Consumption without signal transmission: 10 mA |
N/A |
| Battery life | Approx. 9 h | Hi mode: approx. 25 h Loop mode: approx. 18 h |
N/A |
| Low battery indication | Yes | N/A | |
| Fuse | N/A | 1.6 A, 700 V, fast-acting, Ø 6x32mm |
N/A |
| Maximum conductor size | N/A | N/A | 1.26 in (32 mm) |
| Dimensions (L x W x H) | Approx. 10.92 x 4.43 x 2.55 in (27.75 x 11.25 x 6.5 cm) |
Approx. 7.2 x 3.66 x 1.97 in (18.3 x 9.3 x 5 cm) |
Approx. 5.9 x 2.75 x 1.18 in (15 x 7 x 3 cm) |
| Weight | Approx. 1.20 lb (0.544 kg) | Approx. 1.25 lb (0.57 kg) | Approx. 0.25 lb (0.114 kg) |
Model: Amprobe AT-8020 Advanced Industrial Wire Tracer Kit
- User interface that provides wire direction compass and Receiver alignment capability with conductor through Smart Sensor™ technology
- Safety rated to CAT IV 600 V to work with Energized cables in industrial environments
- Two operating frequencies for Energized and De-Energized circuits: Energized: 6.25 kHz, De-energized: 32.768 kHz
- Non-Contact Voltage Detection
- Ten adjustable Receiver sensitivity levels
- Hi-contrast Receiver LCD
- Supports signal induction with CT-400 Signal Clamp (included with the AT-8030 model)
- Attaches to TIC-410A Hot Stick for extended reach (TIC-410A sold separately)
