Amprobe AT-8030 Advanced Industrial Wire Tracer Kit

Amprobe AT-8030 Advanced Industrial Wire Tracer Kit

Out of Stock
Branch: Industrial Grade

Fast Delivery

Receive in amaizing time

Easy Return

Return policy that lets you shop at ease

Always Authentic Products

We only sell 100% authentic products

Secure Shopping

Your data is always protected


Model: Amprobe AT-8030 Advanced Industrial Wire Tracer Kit

The Amprobe AT-8030 Advanced Industrial Wire Tracer Kit Series intended to guard electricians against the riskiest level of transient overvoltage spikes uphill to 8,000 V known to occur in industrial environments. The Receiver is equipped taking into consideration patented Smart Sensor technology, which finds and displays the location and orientation of Energized wires in walls, floors, and ceilings in fable to the large color TFT LCD screen.

The Scan and Locate feature handily identifies the single precise breaker or combine, eliminating the confusion from collective untrue determined readings common in older technology tracing tools. Embedded forward occurring screens create set-going on easy and error pardon for novice users and experts alike.

Featuring three doer modes tall, low, and loop and two output frequencies (6 kHz and 33 kHz), the AT-8000-T Transmitter incorporates the best technologies easy to accomplish to for optimal wire tracing and breaker identification apropos both energized and de-energized circuits. The AT-8000-T automatically sets the signal based on the order of detected voltage and prompts the fanatic to set the knack level based happening for the application, delivering consistently accurate results.

The AT-8030 kit includes the CT-400 Signal Clamp for inducing signals into wires without access to bare conductors.

Specifications: Amprobe AT-8030 Advanced Industrial Wire Tracer Kit

Features AT-8000-R Receiver AT-8000-T Transmitter CT-400 Signal Clamp
Display size LCD 3.5 in (89 mm) LEDs N/A
Display dimensions (W x H) 2.76 x 2.07 in (70 x 52 mm) N/A N/A
Display Resolution 320 x 240 N/A N/A
Display type Color TFT LCD LEDs N/A
Display color Yes Operating mode LEDs: red
Battery status LEDs: green, yellow, red
Booting time 30 sec < 2 sec N/A
Backlight Yes N/A N/A
Operating temperature -4 °F to 122 °F (-17.77 °C to 49 °C) -4 °F to 122 °F (-20 °C to 50 °C) 32 °F to 122 °F (0 °C to 50 °C)
Operating humidity 45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C)
45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to <122 °F (40 °C to <50 °C)
Storage temperature and humidity -4 °F to 158 °F (-20 °C to 70 °C), <95% RH -4 °F to 158 °F (-20 °C to 70 °C), <95% RH -4 °F to 140 °F (-20 °C to 60 °C), <95% RH
Operating altitude 0 to 6561 ft (2000 m)
Transient protection N/A 8.00 kV (1.2/50μS surge) N/A
Pollution degree 2
IP rating IP 52 IP 40
Drop test 3.28 ft (1 m)
Power supply 4 x AA (alkaline) 8 x AA (alkaline) N/A
Power consumption (typical) 4xAA battery: 2W Hi mode: 70 mA
Loop mode with Clamp: 90 mA
Consumption without signal transmission: 10 mA
Battery life Approx. 9 h Hi mode: approx. 25 h
Loop mode: approx. 18 h
Low battery indication Yes N/A
Fuse N/A 1.6 A, 700 V, fast-acting,
Ø 6x32mm
Maximum conductor size N/A N/A 1.26 in (32 mm)
Dimensions (L x W x H) Approx. 10.92 x 4.43 x 2.55 in
(27.75 x 11.25 x 6.5 cm)
Approx. 7.2 x 3.66 x 1.97 in
(18.3 x 9.3 x 5 cm)
Approx. 5.9 x 2.75 x 1.18 in
(15 x 7 x 3 cm)
Weight Approx. 1.20 lb (0.544 kg) Approx. 1.25 lb (0.57 kg) Approx. 0.25 lb (0.114 kg)

Key Features: Amprobe AT-8030 Advanced Industrial Wire Tracer Kit

  • A user interface that provides wire direction compass and Receiver alignment capability with a conductor through Smart Sensor™ technology
  • Safety rated to CAT IV 600 V to work with Energized cables in industrial environments
  • Two operating frequencies for Energized and De-Energized circuits: Energized: 6.25 kHz, De-energized: 32.768 kHz
  • Non-Contact Voltage Detection
  • Ten adjustable Receiver sensitivity levels
  • Hi-contrast Receiver LCD
  • Includes the CT-400 Signal Clamp for signal induction, HS-1 Magnetic Hanger to optionally hanging Transmitter, and rechargeable batteries and battery chargers
  • Attaches to TIC-410A Hot Stick for extended reach (TIC-410A sold separately)