Amprobe AT-6010 Advanced Wire Tracer Kit
Fast Delivery
Receive in amaizing time
Easy Return
Return policy that lets you shop at ease
Always Authentic Products
We only sell 100% authentic products
Secure Shopping
Your data is always protected
Model: Amprobe AT-6010 Advanced Wire Tracer Kit bd price
Amprobe AT-6010 Advanced Wire Tracer Kit is rugged and reliable which is Easily and expertly locate wires, breakers, and fuses considering the AT-6010 Advanced Wire Tracer. When the Transmitter is associated with the circuit (Energized or De-energized, uphill to 600 V AC/DC in Category I through Category III electrical environments), the Receiver easily detects the transmitted signal in the wires or cables then walls, ceilings, and floors. Work safely regarding energized circuits without the need to declare you will equipment offline. The Transmitter furthermore features a high signal mode for general tracing and a loop mode expected specifically for locating shorts, as nimbly as two optimal tracing frequencies that are automatically activated based upon the detected voltage. The AT-6010 can be sum taking into consideration the CT-400 Signal Clamp (optional adding occurring) for applications where admission to circuit connections is limited or where users are not skillful to connection happening the Transmitter to the circuit through test leads.
Specification: Amprobe AT-6010 Advanced Wire Tracer Kit bd price
| Features | AT-6010-R Receiver | AT-6010-T Transmitter |
| Measurement category | CAT III 600 V | |
| Operating voltage/current | 0 to 600 V | |
| Operating frequency | Energized: 6.25 kHz | |
| Hazardous voltage detection | N/A | > 30 V AC/DC |
| Signal indications | Numeric bar graph display and audible beep | LEDs |
| Response time | Tip Sensor (Energized/De-energized): 500 ms Battery voltage monitoring: 5 sec |
Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec |
| Current output of signal (typical) | N/A | Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS |
| Signal voltage output (nominal) | N/A | De-energized circuit: HIGH: 33 V RMS, 140 Vp-p With CT-400: Loop model: 31 V RMS, 120 Vp-p |
| Range detection (open air) | Tip Sensor (Energized): Max distance via air: up to 20 ft (6.1 m) Pinpointing: approx. 1.97 in (5 cm) Tip Sensor (De-energized): Max distance via air: up to 14.7 ft (4.5 m) Pinpointing: approx. 1.97 in (5 cm) |
N/A |
| Display size | LCD 2.5 in (6.35 cm) | N/A |
| Display dimensions (W x H) | 1.45 x 1.93 in (36.72 x 48.96 mm) |
N/A |
| Display type | Segment LCD | LEDs |
| Display color | Black and white | Operating mode LEDs: red Battery status LED: red |
| Booting time | < 3 sec | < 2 sec |
| Backlight | Yes | N/A |
| Operating temperature | -4 °F to 122 °F (-20 °C to 50 °C) | |
| Operating humidity | 45%: -4 °F to <50 °F (-20 °C to <10 °C) 95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to 122 °F (40 °C to 50 °C) |
|
| Storage temperature and humidity | -4 °F to 158 °F (-20 °C to 70 °C), <95% RH | |
| Operating altitude | 0 to 6561 ft (2000 m) | |
| Transient protection | N/A | 6.00 kV (1.2/50μS surge) |
| Pollution degree | 2 | |
| IP rating | IP 52 | IP 40 |
| Drop test | 3.28 ft (1 m) | |
| Power supply | 4 x AA (alkaline) | 8 x AA (alkaline) |
| Power consumption (typical) | 70 mA | Hi mode: 70 mA Loop mode with Clamp: 90 mA Consumption without signal transmission: 10 mA |
| Battery life | Approx. 25 h | Hi mode: approx. 25 h Loop mode: approx. 18 h |
| Low battery indication | Yes | |
| Fuse | N/A | 1.6 A, 700 V, fast-acting, Ø 6x32mm |
| Dimensions (L x W x H) | Approx. 7.2 x 2.95 x 1.69 in (183 x 75 x 43 mm) |
Approx. 7.2 x 3.66 x 1.97 in (183 x 93 x 50 mm) |
| Weight | Approx. 0.6 lb (0.27 kg) | Approx. 1.25 lb (0.57 kg) |
| Certifications | ||
Key Features: Amprobe AT-6010 Advanced Wire Tracer Kit bd price
- Traces wires in walls, ceilings, floors, and corners
- Locates breakers and fuses
- Pinpoints shorts and opens
- High resolution 2.5″” TFT LCD black & white display
- Simple one-button Transmitter operation
- Two Transmitter signal modes
- “High Signal” mode for normal circuits
- “Loop” mode for closed loop de-energized circuits
- Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
- Comes with custom Amprobe soft carrying case, test leads and accessories
- Rated CAT III 600 V for work directly on an energized circuit without the need to take equipment offline
- Compatible with optional Signal Clamp (CT-400) clamp-on attachment
