Fluke 810 Vibration Tester

PRODUCT CATEGORIES

Clamp Meters

View All General Purpose Residential/Commercial Electrical High-End Industrial, Utility Leakage Wireless

Electrical Testers Insulation Testers Earth Ground Testers Digital Multimeters

View All Advanced Meters Compact Meters Specialty Meters

Power Quality Analyzers

View All Single Phase Three Phase

Process Tools Scope Meters Preventive Maintenance Tools Temperature Meters Thermal Imagers

View All Expert Series Professional Series Performance Series Visual

Miscellaneous Tools Fluke Calibration

Fluke 810 Vibration Tester

Fluke 810 Vibration Tester easily can identify the most common mechanical faults (unbalance, bearings, misalignment, looseness) focus maintenance efforts on the root cause, reducing unplanned downtime.

Brand : Fluke | Category: Preventive Maintenance Tools

Tags: Fluke Bangladesh Fluke BD Fluke Agent Fluke Distributor Fluke Supplier Fluke

Fluke 810 Vibration Tester best solution when you need an answer now! not only this vibration tester has some great features but also the value of the result always spot on.

With the Fluke 810 Vibration Tester most advanced troubleshooting tool for mechanical maintenance, you can do your work simple step-by-step process to report on specific machine faults. Also their severity the first time measurements are taken, without prior measurement history.

So, now we surely say that Fluke 810 Vibration Tester is the best options for overall vibration measurements and spectral diagrams give engineers the ability to quickly asses overall machine health. While enhanced reporting and actionable recommendations give you the confidence you need to address critical problems first.

You can use the Fluke 810 Vibration Tester to:

Troubleshoot problem equipment and understand the root cause of failure
Survey equipment before and after planned maintenance and confirm the repair
Commission new equipment and ensure proper installation
Train new or less-experienced technicians and build confidence and skill across the team
Anticipate equipment failures before they happen and take control of spare parts inventories
Provide quantifiable proof of equipment condition and drive investment in repair or replacement
Prioritize and plan repair activities and operate more efficiently

As a Fluke distributor in Bangladesh, we think about our customer's value. Our customers are the main focal point for us. We always try to support our customers in any situation.

You may also like below Fluke test & measurement tools:

Fluke clamp meter, Fluke multimeter, Fluke thermal imager, Fluke electrical tester

Key features of Fluke 810 vibration tester

On-board identification and location of the most common mechanical faults (bearings, misalignment, unbalance, looseness) focus maintenance efforts on the root cause, reducing unplanned downtime
Overall vibration level allows you to quickly assess overall machine health directly from the diagnosis screen
Viewer PC Software expands data storage and tracking capacity
Tri-axial accelerometer reduces measurement time by 2/3 over single axis accelerometers
Flexible machine speed configurations gives the ability to test a broad range of assets including belt drives, gear boxes, and bevel gears
Fault severity scale with four severity levels helps you prioritize maintenance work
Repair recommendations advise technicians on corrective action
Detailed diagnostic reports and spectral diagrams help confirm data quality, and narrow down the root cause of failures
On-board context sensitive help provides real-time tips and guidance to new users
2 GB expandable on-board memory provides enough space for your machinery’s data
Self-test function ensures optimal performance and more time on the job
Laser tachometer for accurate machine running speed promotes confident diagnoses

Specifications: Fluke 810 Vibration Tester

Diagnostic Specifications
Standard Faults	Unbalance, looseness, misalignment and bearing failures
Analysis For	Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles
Motor Rotational Speed Range	200 rpm to 12000 rpm
Diagnosis Details	Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited peaks, spectra

Electrical Specifications
Ranging	Automatic
A/D Converter	4 channel, 24 bit
Usable Bandwidth	2 Hz to 20 kHz
Sampling	51.2 Hz
Digital Signal Processing Functions	Automatically configured anti-alias filter, high-pass filter, decimation, overlapping, windowing, FFT, and averaging
Sampling Rate	2.5 kHz to 50 kHz
Dynamic Range	128 dB
Signal To Noise Ratio	100 dB
FFT Resolution	800 lines
Spectral Windows	Hanning
Frequency Units	Hz, orders, cpm
Amplitude Units	in/sec, mm/sec, VdB (US), VdB* (Europe)
Non-volatile Memory	SD micro memory card, 2 GB internal + user accessible slot for additional storage

General Specifications
Dimensions (H x D x W)	18.56 x 7.00 x 26.72 cm (7.30 x 2.76 x 10.52 in)
Weight (With Battery)	1.9 kg (4.2 lb)
Display	¼ VGA, 320 × 240 Color (5.7 inch diagonal) TFT LCD with LED backlight
Input/Output Connections	Triaxial sensor connection	4 pin M12 connector
	Single axis sensor connection	BNC connector
	Tachometer Connection	Mini DIN 6 pin connector
	PC Connection	Mini ‘B’ USB (2.0) connector
Battery	Battery type	Lithium-ion, 14.8 V, 2.55 Ah
	Battery charging time	Three hours
	Battery discharge time	Eight hours (under normal conditions)
AC Adapter	Input voltage	100 VAC to 240 VAC
AC Adapter	Input frequency	50/60 Hz
Operating System	WinCE 6.0 Core
Language Support	English, French, German, Italian, Japanese, Portuguese, Simplified Chinese, Spanish
Warranty	Three-years

Environmental Specifications
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Operating Humidity	10% to 95% RH (non-condensing)
Agency Approvals	CHINA RoHS, CSA, CE, C TICK, WEEE
Electromagnetic Compatibility	EN 61326-1:2006, EN 61010:1:2001 2nd ed.

Sensor Specifications
Sensor Type	Accelerometer
Sensitivity	100 mV/g (±5%, 25°C)
Acceleration Range	80 g peak
Amplitude Nonlinearity	1%
Frequency Response	Z	2 - 7,000 Hz ±3dB
Frequency Response	X, Y	2 - 5,000 Hz ±3dB
Power Requirement (IEPE)	18 VDC to 30 VDC, 2 mA to 10 mA
Bias Output Voltage	12 VDC
Grounding	Case grounded
Sensing Element Design	PZT ceramic / shear
Case Material	316L stainless steel
Mounting	10-32 captive socket head screw, 2-pole rare earth magnet (48 lb pull strength)
Output Connector	4-Pin, M12
Mating Connector	M12 - F4D
Non-volatile Memory	TEDS 1451.4 compatible
Vibration Limit	500 g peak
Shock Limit	5000 g peak
Electromagnetic Sensitivity, Equivalent g	100 μg/gauss
Sealing	Hermetic
Temperature Range	-50°C to 120°C (-58°F to 248°F) ±7%
Warranty	One-year

Tachometer Specifications
Dimensions (D x W)	2.86 x 12.19 cm (1.125 x 4.80 in)
Weight	96 g (3.4 oz) with cable
Power	Powered by 810 Vibration Tester
Detection	Laser Diode Class 2
Range	6.0 to 99,999 rpm
Accuracy	6.0 to 5999.9 rpm	±0.01% and ±1 digit
Accuracy	5999.9 to 99999 rpm	±0.05% and ±1 digit
Resolution	0.1 rpm
Effective Range	1 cm to 100 cm (0.4 in to 39.27 in)
Response Time	1 second (> 60 rpm)
Controls	Measure on/off transparent button
Interface	6 Pin Mini DIN
Cable Length	50 cm (19.586 in)
Warranty	One-year
Tachometer Accessories	Reflective tape	1.5 x 52.5 cm (0.59 x 20.67 in)

Viewer PC Software
Minimum Hardware Requirements	1 GB RAM
Operating System Requirements	Windows 7, 8.1, and 10

Specifications: Fluke 810 Vibration Tester

Diagnostic Specifications
Standard Faults	Unbalance, looseness, misalignment and bearing failures
Analysis For	Motors, fans, blowers, belts and chain drives, gearboxes, couplings, centrifugal pumps, piston pumps, sliding vane pumps, propeller pumps, screw pumps, rotary thread/gear/lobe pumps, piston compressors, centrifugal compressors, screw compressors, closed coupled machines, spindles
Motor Rotational Speed Range	200 rpm to 12000 rpm
Diagnosis Details	Plain-text diagnosis, fault severity (slight, moderate, serious, extreme), repair details, cited peaks, spectra

Electrical Specifications
Ranging	Automatic
A/D Converter	4 channel, 24 bit
Usable Bandwidth	2 Hz to 20 kHz
Sampling	51.2 Hz
Digital Signal Processing Functions	Automatically configured anti-alias filter, high-pass filter, decimation, overlapping, windowing, FFT, and averaging
Sampling Rate	2.5 kHz to 50 kHz
Dynamic Range	128 dB
Signal To Noise Ratio	100 dB
FFT Resolution	800 lines
Spectral Windows	Hanning
Frequency Units	Hz, orders, cpm
Amplitude Units	in/sec, mm/sec, VdB (US), VdB* (Europe)
Non-volatile Memory	SD micro memory card, 2 GB internal + user accessible slot for additional storage

General Specifications
Dimensions (H x D x W)	18.56 x 7.00 x 26.72 cm (7.30 x 2.76 x 10.52 in)
Weight (With Battery)	1.9 kg (4.2 lb)
Display	¼ VGA, 320 × 240 Color (5.7 inch diagonal) TFT LCD with LED backlight
Input/Output Connections	Triaxial sensor connection	4 pin M12 connector
	Single axis sensor connection	BNC connector
	Tachometer Connection	Mini DIN 6 pin connector
	PC Connection	Mini ‘B’ USB (2.0) connector
Battery	Battery type	Lithium-ion, 14.8 V, 2.55 Ah
	Battery charging time	Three hours
	Battery discharge time	Eight hours (under normal conditions)
AC Adapter	Input voltage	100 VAC to 240 VAC
AC Adapter	Input frequency	50/60 Hz
Operating System	WinCE 6.0 Core
Language Support	English, French, German, Italian, Japanese, Portuguese, Simplified Chinese, Spanish
Warranty	Three-years

Environmental Specifications
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Operating Humidity	10% to 95% RH (non-condensing)
Agency Approvals	CHINA RoHS, CSA, CE, C TICK, WEEE
Electromagnetic Compatibility	EN 61326-1:2006, EN 61010:1:2001 2nd ed.

Sensor Specifications
Sensor Type	Accelerometer
Sensitivity	100 mV/g (±5%, 25°C)
Acceleration Range	80 g peak
Amplitude Nonlinearity	1%
Frequency Response	Z	2 - 7,000 Hz ±3dB
Frequency Response	X, Y	2 - 5,000 Hz ±3dB
Power Requirement (IEPE)	18 VDC to 30 VDC, 2 mA to 10 mA
Bias Output Voltage	12 VDC
Grounding	Case grounded
Sensing Element Design	PZT ceramic / shear
Case Material	316L stainless steel
Mounting	10-32 captive socket head screw, 2-pole rare earth magnet (48 lb pull strength)
Output Connector	4-Pin, M12
Mating Connector	M12 - F4D
Non-volatile Memory	TEDS 1451.4 compatible
Vibration Limit	500 g peak
Shock Limit	5000 g peak
Electromagnetic Sensitivity, Equivalent g	100 μg/gauss
Sealing	Hermetic
Temperature Range	-50°C to 120°C (-58°F to 248°F) ±7%
Warranty	One-year

Tachometer Specifications
Dimensions (D x W)	2.86 x 12.19 cm (1.125 x 4.80 in)
Weight	96 g (3.4 oz) with cable
Power	Powered by 810 Vibration Tester
Detection	Laser Diode Class 2
Range	6.0 to 99,999 rpm
Accuracy	6.0 to 5999.9 rpm	±0.01% and ±1 digit
Accuracy	5999.9 to 99999 rpm	±0.05% and ±1 digit
Resolution	0.1 rpm
Effective Range	1 cm to 100 cm (0.4 in to 39.27 in)
Response Time	1 second (> 60 rpm)
Controls	Measure on/off transparent button
Interface	6 Pin Mini DIN
Cable Length	50 cm (19.586 in)
Warranty	One-year
Tachometer Accessories	Reflective tape	1.5 x 52.5 cm (0.59 x 20.67 in)

Viewer PC Software
Minimum Hardware Requirements	1 GB RAM
Operating System Requirements	Windows 7, 8.1, and 10

Models: Fluke 810 Vibration Tester

Includes:

Vibration Tester with diagnostic technology
Tri-axial accelerometer, magnet mount, mounting pad kit with adhesive, accelerometer quick-disconnect cable
Carrying case
Laser tachometer and storage pouch
Smart battery pack with cable and adapters
Shoulder strap and adjustable hand strap
Viewer PC software
Mini USB to USB cable
Getting Started Guide, illustrated quick reference guide, User’s Manual CD-ROM,

No recodrs!

Accessories of Fluke 810 Vibration Tester

Your Rating: