Fluke 830 Laser Shaft Alignment Tool best option for you dear engineers.
because of this meter includes a unique “All-in-One” result screen that shows both coupling results and vertical and horizontal feet corrections, making it easy to take corrective action.
This Fluke tools not only show the best result but also the value of this result always spot on.
It's a well-known reality - all rotating machinery is prone to placement. If you are still exploitation rulers and dial indicators to confirm your rotating machinery is correctly aligned, you may be losing thousands of bucks annually in replacement bearing prices, hours of reserve repair time, and incapacitating unplanned time period, to not mention taking years off your machine's helpful life.
The Fluke 830 optical device Shaft Alignment tool is easy-to-use, providing you with quick, correct and unjust answers that may keep your plant up and running. once it involves optical device shaft alignment, knowledge is sweet however answers square measure higher.
You may also like below Fluke products:
Fluke 117, Fluke Ti400, Fluke 279 FC, Fluke 810
Features
Key features of the Fluke 830 Laser Shaft Alignment Tool
- Easy to use tool for precision alignment of rotating shafts
- Includes compass measurement mode to enable flexible, reliable, and repeatable measurements using an activated electronic inclinometer
- Provides an intuitive, guided user interface to quickly and easily complete machine alignments
- Features single laser measurement technology to reduce errors from backlash and enhance accuracy.
Other useful features:
- Includes a unique “All-in-One” result screen that shows both coupling results and vertical and horizontal feet corrections, making it easy to take corrective action
- Provides autosave and resume capability to ensure your data is there when you need it
- Offers unique extend mode to handle gross misalignment by virtually increasing laser detector size
- Features a dynamic machine tolerance check that provides continuous evaluation of alignment adjustments so you know when your machine is in the acceptable range
Specifications
Specifications: Fluke 830 Laser Shaft Alignment Tool
| Computer |
| CPU |
Intel XScale PXA270 running at 312 MHz |
| Memory |
64 MB RAM, 64 MB flash |
| Display |
Type: TFT, transmissive (sunlight-readable), 65,535 colors, backlit LED |
| Integrated light sensor for automated adjustment of the brightness to the display according to the lighting conditions which extends battery life |
Resolution: 320 x 240 pixel;
Dimensions: 89 mm (3.5 in) diagonal |
| Keyboard elements: Setup, measure, diagnose, menu, clear, enter, back keys, navigation cursor cross, alphanumeric keyboard and on/off button |
| LED indicators |
Multicolor LED for laser status and alignment condition |
| Multicolor LED for battery status |
| Power supply |
Integrated Lithium-ion polymer rechargeable battery: 7.4 V/ 2.6 Ah (for optional computer) with typical operating time of 17 hours (based upon an operating cycle of 33% measurement, 33% computation and 33% 'sleep' mode) |
| External interface |
USB host and USB device (slave) |
| Integrated wireless communication, Class 1, transmitting power 100 mW |
| RS232 (serial) for sensor |
| AC adapter/charger socket |
| Environmental protection |
IP 65 (dustproof and water spray resistant), shockproof |
| Relative humidity 10% to 90% |
| Operating temperature |
-10°C to 50°C (14°F to 122°F) |
| Storage temperature |
-20°C to 60°C (-4°F to 140°F) |
| Dimensions |
220 mm x 165 mm x 45 mm (8.7 in x 6.5 in x 1.8 in) |
| Weight |
742 g (1.64 lb) |
| Sensor |
| Measurement principle |
Coaxial, reflected laser beam |
| Environmental protection |
IP 67 (submersible, dustproof) |
| Ambient light protection |
Yes |
| Storage temperature |
-20°C to 80°C (-4°F to 176°F) |
| Operating temperature |
0°C to 55°C (32°F to 131°F) |
| Dimensions |
107 mm x 70 mm x 49 mm (4 1/4 in x 2 3/4 in x 2 in) |
| Weight |
177 g (6 1/2 oz) |
| Laser |
Type: Ga-Al-As semiconductor laser |
| Wavelength (typical) 675 nm (red, visible) |
| Safety class: Class 2, FDA 21 CFR 1000 and 1040 |
| Beam power: < 1 mW |
| Safety precautions: Do not look into laser beam |
| Detector |
Measurement area: unlimited, dynamically extendible
(U.S. Patent 6,040,903) |
| Resolution: 1 μm; Accuracy (avg): > 98% |
| Inclinometer |
Measurement range: 0° to 360°; Resolution: < 1° |
| Prism |
| Type |
90° roof prism; Accuracy (avg): > 99% |
| Environmental protection |
IP 67 (submersible, dustproof) |
| Operating temperature |
-20°C to 60°C (-4°F to 140°F) |
| Storage temperature |
-20°C to 80°C (-4°F to 176°F) |
| Dimensions |
100 mm x 41 mm x 35 mm (4 in x 1 5/8 in x 1 3/8 in) |
| Weight |
65 g (2 1/2 oz.) |
| Carrying case |
| Dimensions |
565 mm x 343 mm x 127 mm (22 1/4 in x 13 1/2 in x 5 in) |
| Weight, including all standard parts |
5.6 kg (12.3 lb) |
Includes
Models: Fluke 830 Laser Shaft Alignment Tool
Includes:
- Fluke 830 Laser Alignment Tool
- Laser sensor
- Laser prism
- Instruction kit and carrying case
- Power adapter
- Tape measure
- Chain-type mounting bracket with 150 mm support posts (2x)
- 300 mm support post (4x)
- Microfiber cleaning cloth
- Sensor cable
- PC cable
- USB drive
- USB drive cable
- Wireless Bluetooth® module
Accessories
Accessories: Fluke 830 Laser Shaft Alignment Tool
Other (1)
Kits (1)
