Fluke 805 FC Vibration Meter not only provide you the accurate result but also the value of this meter always spot on. As a Fluke distributor in Bangladesh, we offer the lowest price Fluke 805 FC vibration meter for our customers.
Do you know Fluke 805 FC Vibration Meter holds and saves up to 3,500 measurements onboard memory?
The main focal point of this meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration, bearing health and machine health.
You may also like below Fluke test & measurement tools:
Fluke 810 Vibration Tester, Fluke 830 Laser Shaft Alignment Tool, Fluke 805 Vibration Meter
Features
Key features of Fluke 805 FC Vibration Meter
Quickly create asset list and work order on your PC, set up machine profiles using Fluke Connect App on your smart device, push routes to your 805 FC for your technicians in the field.
Take accurate, reliable measurements at both low and high-frequency ranges
Store results in the cloud and share data with your team remotely
Minimize measurement variations caused by device angle or contact pressure
Other useful features of Fluke 805 FC Vibration Meter:
- Reliable, repeatable, accurate device for checking bearings and overall vibration
- Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
- Provides consistent data quality at both low and high-frequency ranges
- Offers four-level severity scale to assess the urgency of problems and bearing condition
- Allows you to export data via USB or wirelessly, through the Fluke Connect® mobile app
- Compatible with Fluke Connect® Mobile App that can transmit measurements to your smartphone to be shared in real time
- Enables you to get authorization to take next steps in an instant if machine health is at risk via Fluke Connect™ mobile app*
- Provides large high-resolution display for easy navigation and viewing
- Features built-in flashlight for viewing measurement locations in dark areas
- Allows you to view trends in Microsoft® Excel using pre-built templates
- Measures overall vibration (10 Hz to 1,000 Hz) for acceleration, velocity, and displacement units of measurement for a wide variety of machines
- Provides Crest Factor+ technology for the reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
- Compares vibration levels with ISO-10816 severity scales and stores results to the Fluke Connect Cloud
- Features colored lighting system (green, red) and on-screen comments to indicate how much pressure needs to be applied to take measurements
- Measures temperature with Spot IR Sensor to increase diagnostic capabilities
- Holds and saves up to 3,500 measurements in on-board memory
- External accelerometer (optional) support for hard to reach locations
Specifications
Specifications: Fluke 805 FC Vibration Meter
| Specifications |
| Low-frequency range (overall measurement) |
10 Hz to 1,000 Hz |
| High-frequency range (CF+ measurement) |
4,000 Hz to 20,000 Hz |
| Severity levels |
Good, satisfactory, unsatisfactory, unacceptable |
| Vibration limit |
50 g peak (100 g peak-peak) |
| A/D converter |
16-bit |
| Signal to noise ratio |
80 dB |
| Sampling rate |
Low frequency: 20,000 Hz
High frequency: 80,000 Hz |
| Real-time clock backup |
Coin battery |
| Sensor |
| Sensitivity |
100 mV g ± 10% |
| Measurement range |
0.01 g to 50 g |
| Low-frequency range (overall measurement) |
10 Hz to 1,000 Hz |
| High-frequency range |
4,000 Hz to 20,000 Hz |
| Resolution |
0.01 g |
| Accuracy |
At 100 Hz ± 5% of the measured value |
| Amplitude Units |
| Acceleration |
g, m/sec² |
| Velocity |
in/sec, mm/sec |
| Displacement |
mils, mm |
| Infrared Thermometer (Temperature Measurement) |
| Range |
-20 °C to 200 °C (-4 °F to 392 °F) |
| Accuracy |
±2 °C (4 °F) |
| Focal length |
Fixed, at ~3.8 cm (1.5") |
| External Sensor |
| Note: Fluke supports but does not provide external sensors |
| Frequency range |
10 Hz to 1,000 Hz |
| A bias voltage (to supply power) |
20 V dc to 22 V dc |
| Bias current (to supply power) |
Maximum 5 mA |
| Firmware |
| External interfaces |
USB 2.0 (full speed) communication |
| Data capacity |
Database on internal flash memory |
| Upgrade |
Through USB |
| Memory |
Up to 3,500 measurements |
| Radiated Emission |
| Electrostatic discharge: burst |
Standard EN 61000-4-2 |
| Electromagnetic interference |
Standard EN 61000-4-3 |
| RE |
Standard CISPR 11, Class A |
| Environmental |
| Operating temperature |
-20 °C to 50 °C (-4 °F to 122 °F) |
| Storage temperature |
-30 °C to 80 °C (-22 °F to 176 °F) |
| Operating humidity |
10% to 95% RH (non-condensing) |
| Operating/storage altitude |
Sea level to 3,048 meters (10,000 feet) |
| IP rating |
IP54 |
| Vibration limit |
500g peak |
| Drop test |
1 meter |
| General Specifications |
| Battery type |
AA (2) Lithium Iron Disulfide |
| Battery life |
250 measurements |
| Size (L x W x H) |
24.1 cm x 7.1 cm x 5.8 cm
(9.5 in x 2.8 in x 2.3 in) |
| Weight |
0.40 kg (0.89 lb) |
| Connectors |
USB mini-B 7-pin, external sensor jack (SMB connector) |
Includes
Models: Fluke 805 FC Vibration Meter
Includes:
- USB cable
- Storage case
- Belt holster
- Quick reference guide
- Two (2) AA batteries
