Fluke 773 Milliamp Process Clamp Meter

PRODUCT CATEGORIES

Clamp Meters

View All General Purpose Residential/Commercial Electrical High-End Industrial, Utility Leakage Wireless

Electrical Testers Insulation Testers Earth Ground Testers Digital Multimeters

View All Advanced Meters Compact Meters Specialty Meters

Power Quality Analyzers

View All Single Phase Three Phase

Process Tools Scope Meters Preventive Maintenance Tools Temperature Meters Thermal Imagers

View All Expert Series Professional Series Performance Series Visual

Miscellaneous Tools Fluke Calibration

Fluke 773 Milliamp Process Clamp Meter

Fluke 773 Milliamp Process Clamp Meter loop calibrator that measures 4 to 20 mA signals without breaking the loop. You can be done your job more than faster with this latest clamp meter from Fluke.

Brand : Fluke | Category: Clamp Meters

Tags: Fluke Bangladesh Fluke BD Fluke Agent Fluke Distributor Fluke Supplier Fluke Fluke Clamp Meter Lowest price clamp meter in bd

Fluke 773 Milliamp Process Clamp Meter sources 4 to 20 mA signals for testing control system I/O or I/Ps. This clamp meter has some great feature. One of them is it delivers 0.01 mA resolution and sensitivity without no problem.

Fluke 773 Milliamp Process Clamp Meter saves time and money by activity output signals while not motility down the system

The Fluke 773 milliamp clamp meter is correct and versatile. It saves time and cash by activity 4–20 mA signals 5 times quicker than with ancient DMMs, and while not breaking the loop. meaning you'll troubleshoot a live device while not having to power down and probably miss one thing occurring within the method.

The 773 is good for troubleshooting transmitters, valves, and programmable logic controllers (PLCs) found in method plants. It measures low-level dc current and correlates method indication with the real cost. And it measures up to 99.0 mA non-contact, as well as ten to fifty mA signals in older management systems.

The 773 conjointly sources and measures dc voltage, therefore it is often accustomed troubleshoot voltage input and output devices. you'll detach the clamp section of the meter and use it as a foreign jaw, connected to the most body by Associate in a Nursing extension cable to create it easier to require measurements in tight areas. Plus, automatic power-off options save battery life, therefore, you'll work longer while not dynamical the batteries.

We Iconic Engineering Limited offers the best Fluke clamp meter for our all customers. Not only as a Fluke agent we provide the product but also we support our customers all the time.

Key features:

Loop calibrator that measures 4 to 20 mA signals without breaking the loop
Features best in class 0.2% accuracy
Sources 4 to 20 mA signals for testing control system I/O or I/Ps
Delivers 0.01 mA resolution and sensitivity
Measures DC voltage to verify 24V power supplies or voltage I/O signals

Other useful features:

Sources DC voltage to test input devices that accept a 1-5V or 0 to 10V signal
Simultaneously measures the mA signal with the clamp and sources a mA signal
Measures mA signals for PLC and control system analog I/O
Simulates 4-20 mA signals for testing control system I/O
Features a detachable clamp with the extension cable for measurements in tight locations
Extends battery life with auto-off and backlight timeout
Captures and displays changing measurements with Hold function
Measures 4 to 20 mA signals with in-circuit measurement
Includes simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
Offers mA or voltage output linear ramp or 25% step output
Provides scaled mA output to provide a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
Enables milliamp signal logging to a separate logging device without breaking the loop
Applies a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
Dual backlit display with both mA measurement and percent of 4 to 20 mA span
Measurement Spotlight to illuminate hard to see wires in dark enclosure
Measures 10 to 50 mA signals in older control systems using the 99.9 mA range
Automatically changes the 4 to 20 mA output for remote testing

Specifications
The diameter of measurable conductor	0.177" or 4.5 mm max
Operating temperature	-10 to 50ºC
Storage temperature	-25 to 60ºC
Operating humidity	< 90% @ <30ºC, < 75% @ 30 to 55ºC
Operating Altitude	0 to 2000 m
IP rating	IP 40
Size	44 x 70 x 246 mm (2 7/8 x 5 ¾ x 11 5/8 in)
Weight	410 g, (14.4 oz)
Vibration	Random 2 g, 5 to 500 Hz
Shock	1-meter drop test (except the jaw)
EMI/RFI	Meets EN61326-1
	For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
Temperature coefficient	0.01% ºC (< 18ºC or > 28ºC)
Power, battery life	(4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
Warranty	Three years for electronics One year for cable and clamp assembly
Functional Specifications
mA measurement (measured by clamp)	Resolution / range	0 to 20.99 mA
	Accuracy	0.2% + 5 counts
	Resolution / range	21.0mA to 100.0 mA
	Accuracy	1% + 5 counts
mA measurement (measured in series with test jacks)	Resolution / range	0 to 24.00 mA
	Accuracy	0.2% + 2 counts
mA source (maximum mA drive: 24 mA into 1,000 ohms)	Resolution / range	0 to 24.00 mA
	Accuracy	0.2% + 2 counts
mA simulate (maximum voltage 50 V dc)	Resolution / range	0 to 24.00 mA
	Accuracy	0.2% + 2 counts
Voltage source (2 mA maximum drive current)	Resolution / range	0 to 10.00 V DC
	Accuracy	0.2% + 2 counts
Voltage measure	Resolution / range	0 to 30.00 V DC
	Accuracy	0.2% + 2 counts