Fluke 1000FLT Fluorescent Light Tester
As one of the most complete lamp testers on the market, the Fluke 1000FLT enables you to perform the five essential lighting tests:
- Lamp test: Test bulb without removing from the fixture
- Ballast test: Easily determine if the ballast is working
- Non-contact voltage: Quickly check for voltage presence
- Pin continuity test: Tests if filaments have continuity
Ballast-type test: Determine if the ballast is electronic or magnetic without taking the fixture apart–identify energy-wasting ballasts.
Fluke 1000FLT not only provide you the accurate result but also the value of this tester always spot on.
You may also like below test & measurement tools:
Fluke clamp meter, Fluke digital multimeter, Fluke thermal imagers
Features
Key features of Fluke 1000FLT Fluorescent Light Tester
- Performs all five essential lighting tests in under 30 seconds to pinpoint problems and verify operation
- Survives on-the-job handling—Drop-tested to survive a drop from a six-foot (two meters) ladder
- Delivers quick, easy results with bright indicator light plus an audible alert
- Comes with a three-year warranty
Specifications
Specifications: Fluke 1000FLT Fluorescent Light Tester
| General Specifications |
| Lamp test max output |
3000 V peak |
| Ballast test |
20 kHz |
| Ballast type discriminator |
≤3m (10 feet) distance |
| Pin continuity test |
< 1 kΩ |
| NCV (VoltAlert™) |
85 to 400 V AC
45 a 67 Hz
≤10 cm (4 in) distance |
| Environmental Specifications |
| Temperature |
Operating: -10 °C to +50 °C (14 °F to +122 °F)
Storage: -40 °C to +60 °C (-40 °F to +140 °F) |
| Relative humidity |
85% maximum |
| Safety Specifications |
| Safety rating |
IEC 61010-1, pollution degree 2 |
| Mechanical and General Specifications |
| Size |
21.5 cm x 3.0 cm x 6.5 cm (8.5 x 1.2 x 2.6 in) |
| Weight |
0.37 kg (0.80 lb.) |
| Battery type |
4 x AA alkaline IEC LR6 |
| Battery life |
40 hours |
| Auto power off |
20 minutes after non-use |
| Low battery indicator |
Power button light blinks when power is low (typically 85% of capacity depleted) |
| Operating Altitude |
<2000 m |
| Electromagnetic environment |
EN 61326-1: Portable |
| Electromagnetic compatibility |
CE IEC: CISPR 11: Grupo 2, class A |
| Group 2 contains all ISM RF equipment in which radio-frequency energy in the frequency range 9 kHz to 400 GHz is intentionally generated and used or only used, in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purposes |
| Class A equipment is suitable for use in non-domestic locations and/or directly connected to a low-voltage power supply network |
| EE.UU. FCC part 15, subpart B: exempt as test equipment per clause 15.103 |
| Korea only Class A Equipment (Industrial Broadcasting & Communication Equipment)1 |
| 1 This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes. |
| Resistance to impact |
2-meter drop |
| Warranty |
3 years |
Includes
Includes: Fluke 1000FLT Fluorescent Light Tester
- Quick reference guide
- 4 AA alkaline batteries
- Warranty card (3-year warranty)
- H1000 holster
Accessories
Accessories: Fluke 1000FLT Fluorescent Light Tester
