Receive in amaizing time
Return policy that lets you shop at ease
We only sell 100% authentic products
Your data is always protected
Amprobe's hand-held residential and classified ad Voltage and Continuity Tester is loaded once safety, period-saving, and correctness features. It allows you to speedily troubleshoot voltage and continuity for residential and commercial applications using visual, audible, and tactile alerts.
You can speedily press on ac and dc voltage in circuitry and its components including outlets, roomy fixtures, batteries, and extension cords as expertly as test the continuity of fuses, light bulbs, and electrical partners for electrical tools. Input into full range polarity detection, the VPC-12 signals continuity and voltage taking into consideration visual, audible, and vibrating alerts. On its outlook, seven LED indicators conveniently differentiate in the middle of key voltage levels: 24, 120, 208, 240, 277, 480, 600 V AC; and 6, 12, 24, 36, 48,110, 220 V DC.
To accretion correctness and quickness, the VPC-12 turns in version to once a hermetically sealed circuit is sensed, automatically choose AC or DC voltage or continuity mode, and auto-off in the middle of removed from a circuit. Measuring knocked out 6 inches long and weighing less than half a pound, its rugged, compact design impression for manageable one-handed use. With effective battery animatronics of 40 hours and functioning temperature ranging from 41 degrees F to 140 degrees F, this tool is just as rugged and obedient as it is safe.
As is traditional from an Amprobe tool, it brings the highest customary of safety to professional electricians, appliance technicians, and homeowners functional in CAT IV 600 V environments. The VPC-12: complies gone the requirements of relevant European health, safety, and environmental auspices legislation; comply then the applicable technical standards for Electromagnetic Compatibility (EMC), and has been independently qualified by CSR for US and Canadian Markets. In CAT IV environments, use the exam probes with the study hat upon. This decreases the exposed explore tip to condense the possibility of arc flash from rushed circuits. When the investigate cap is off, the examine tip is 18 mm and rated to CAT II 1000 V.
With the VPC-12, a vibrating responsive indicates the presence of continuity as dexterously as dangerous voltage levels, in the combine to the visual and audible alerts mentioned above. This is especially to your liking to benefit when wearing thick PPE fashion totaling and active in omnipotent vibes. The VPC-12 includes VolTect Non-right of admission Voltage Detection, additional detail to the level of safety gone in entertain gone high voltage levels in an industrial air. Built-in roomy makes on the go in dimly-lit areas reachable plus the VPC-12.
Features | ||
LED Voltage range | 24…600 V AC, 6…220 V DC | |
LED voltage indicators | AC volts: 24 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V, DC volts: 6 V, 12 V, 24 V, 36 V, 48 V, 110 V, 220 V | |
Frequency range | 50 to 60 Hz | |
Acoustic indication | ≥ 24 VAC, ≥ 6 V DC | |
Built-in vibration alert | ≥ 24 VAC, ≥ 6 V DC | |
Tolerances LEDs | -30% to 0% of reading | |
Voltage detection | Automatic | |
Hazardous voltage indication | ≥ 24 VAC; ≥ 48 VDC | |
Range detection | Automatic | |
Polarity detection | Full range | |
Continuity indication | LED, buzzer and vibration ( 0 to 45 kΩ ON; >85 kΩ OFF) | |
Continuity range | 0 to 45 kΩ | |
Continuity tolerances | 0% to + 50% | |
Continuity buzzer | 3 kHz | |
VolTect™ non-contact voltage | 90 to 600 VAC, Sensitivity: beeps and vibrates ≤ 10 mm (0.39 in) distance from a wire carrying 100 VAC |
|
Work light | yes | |
Input impedance | 1 MΩ | |
Operating time | 30 seconds ON maximum and wait for five minutes before taking another measurement | |
Operating altitude | ≤ 6561 ft (2000 m) | |
Operating temperature | 41 °F to 122 °F (5 °C to 50 °C) | |
Storage conditions | -22 °F to 140 °F (-30 °C to 60 °C) | |
Humidity (Without Condensation) | ≥ 80% RH at 41 °F to 104 °F (5 °C to 40 °C); ≥ 50% RH at > 104 °F to 122 °F (> 40 °C to 50 °C) | |
Pollution degree | 2 | |
Power supply | Three 1.5 V battery AAA, LR03, UM4 or equivalent | |
Battery life | 40 hours (alkaline) (typical) | |
Electrical safety | CAN/CSA-C22.2 No. 61010-1-12, UL Std. No. 61010-1 (3rd Edition), CAN/CSA-C22.2 No. 61010-031-07, UL 61010-031 (1st Edition – 2007), CAN/CSA-C22.2 No. 61010-2-030-12, UL 61010-2-030(1st Edition -2012) |
|
Overvoltage category | CAT IV 600 V In CAT III or CAT IV environments, use the test probes with the probe cap on. This decreases the exposed probe tip to reduce the possibility of arc flash from short circuits. When the probe cap is off, the probe tip is 18 mm and rated to CAT II 1000 V. |
|
EMC | Conforms to IEC 61326-1 | |
Dimensions (H x W x D) | 5.90 x 2.13 x 1.34 in (150 x 54 x 34 mm) | |
Weight | Approximately 0.45 lb (205 g) with batteries installed |
No reviews