Amprobe VPC-10A Voltage and Continuity Tester

Brand:

Ave. Rating:

Model: Amprobe VPC-10A Voltage and Continuity Tester

Amprobe's hand-held residential and classified ad Voltage and Continuity Testers are loaded as soon as safety, era-saving, and correctness features. They make a clean breast to speedily troubleshoot voltage and continuity for residential and public pronouncement applications using visual and audible alerts.

Quickly be sprightly AC and DC voltage in circuitry and its components including outlets, well-ventilated fixtures, batteries, and extension cords as proficiently as exam the continuity of fuses, lighthearted bulbs, and electrical friends.

In supporter to full range polarity detection, they both signal continuity and voltage subsequent to visual and audible alerts. On its direction, seven LED indicators handily differentiate along surrounded by key voltage levels: 24, 120, 208, 240, 277, 480, 600 V AC; and 6, 12, 24, 36, 48,110, 220 V DC.

To bump precision and quickness, the VPC-10A turns in relation to the order of also an unconditional circuit is sensed, automatically selects AC or DC voltage or continuity mode, and auto-off subsequent to removed from a circuit.

Measuring under 6 inches long and weighing less than half a pound, its rugged, compact electrical tools that design allows for easy one-handed use. With vivacious battery energy of 40 hours and on the go temperature ranging from 41 degrees F to 140 degrees F, this tool is just as rugged and obedient as it is safe. Also know more about this type of tool visit Tools Bangladesh.

Features

Key Features: Amprobe VPC-10A Voltage and Continuity Tester

• Quickly troubleshoot voltage and continuity and detect the presence of voltages easily
• Turns on when a complete circuit is sensed, automatically selects AC or DC voltage or continuity mode, and autos-off when removed from a circuit
• Seven visual voltage indicators clearly differentiating between key voltage levels

Specifications

Specifications: Amprobe VPC-10A Voltage and Continuity Tester

Features
LED Voltage range	24…600 VAC, 6…220 V DC
LED voltage indicators	AC volts: 24 V, 120 V, 208 V, 240 V, 277 V, 480 V, 600 V, DC volts: 6 V, 12 V, 24 V, 36 V, 48 V, 110 V, 220 V
Frequency range	50 to 60 Hz
Acoustic indication	≥ 24 VAC, ≥ 6 V DC
Built-in vibration alert	–
Tolerances LEDs	-30% to 0% of reading
Voltage detection	Automatic
Hazardous voltage indication	≥ 24 VAC; ≥ 48 V DC
Range detection	Automatic
Polarity detection	Full range
Continuity indication	LED and buzzer ( 0 to 45 kΩ ON; >85 kΩ OFF)
Continuity range	0 to 45 kΩ
Continuity tolerances	0% to +50%
Continuity buzzer	3 kHz
VolTect™ non-contact voltage	–
Work light	–
Input impedance	1 MΩ
Operating time	30 seconds ON maximum and wait for five minutes before taking another measurement
Operating altitude	≤ 6561 ft (2000 m)
Operating temperature	41 °F to 122 °F (5 °C to 50 °C)
Storage conditions	-22 °F to 140 °F (-30 °C to 60 °C)
Humidity (Without Condensation)	≥ 80% RH at 41 °F to 104 °F (5 °C to 40 °C); ≥ 50% RH at > 104 °F to 122 °F (> 40 °C to 50 °C)
Pollution degree	2
Power supply	Three 1.5 V battery AAA, LR03, UM4 or equivalent
Battery life	40 hours (alkaline) (typical)
Electrical safety	CAN/CSA-C22.2 No. 61010-1-12, UL Std. No. 61010-1 (3rd Edition), CAN/CSA-C22.2 No. 61010-031-07, UL 61010-031 (1st Edition – 2007), CAN/CSA-C22.2 No. 61010-2-030-12, UL 61010-2-030(1st Edition -2012)
Overvoltage category	CAT III 600 V In CAT III environments, use the test probes with the probe caps on.This decreases the exposed probe tip to reduce the possibility of an arc flash from short circuits. When the probe cap is off, the probe tip is 18 mm and rated to CAT II 1000 V.
EMC	Conforms to IEC 61326-1
Dimensions (H x W x D)	5.90 x 2.13 x 1.34 in (150 x 54 x 34 mm)
Weight	Approximately 0.45 lb (205 g) with batteries installed