Fluke 373 True-RMS AC Clamp Meter

Brand:

Branch: Industrial Grade

Ave. Rating:

Fluke 373 True-RMS AC Clamp Meter easily can measures resistance to 6000 Ω with continuity detection.

Fluke 373 True-RMS AC Clamp Meter is an earsplitting substitute for AC-unaccompanied current measurement situations. Featuring True RMS AC voltage and current measurements you can undertaking AC current to 600 A and AC voltage to 600V. The 373 along with events DC voltage to 600 V and resistance to 6000.

To make it even easier to use, the large, easy-to-right of admission backlit display provides greater than before visibility in dimly lit conditions.

And the 373 automatically sets the truthful measurement range based very about the voltage function along with in the middle of your to power going on, so you get your hands on not need to impinge on the switch even if taking a measurement. When you put it all together, you'll locate the Fluke 373 offers anything you need, benefit a tiny more.

Fluke tools always provide an accurate result in any environment. The wide range of Fluke clamp meter like as Fluke 381, Fluke 375, Fluke 368 FC also provide the best result that you are looking for.

Features

Key features: Fluke 373 True-RMS AC Clamp Meter

A top-performing True-RMS current clamp for AC-only current measurements to 600 A
Measures AC and DC voltage to 600 V
Measures resistance to 6000 Ω with continuity detection
Offers state of the art signal processing to provide stable readings even in noisy electrical environments

Specifications

Specifications: Fluke 373 True-RMS AC Clamp Meter

Electrical Specifications
AC Current
Range	600.0 A
Resolution	0.1 A
Accuracy	2 % ± 5 digits (48 – 62 Hz)
Crest Factor (50/60 Hz)	2.5 @ 600 A
AC Voltage
Range	600.0 V
Resolution	0.1 V
Accuracy	1.0 % ± 5 digits (48 – 62 Hz)
DC Voltage
Range	600.0 V
Resolution	0.1 V
Accuracy	1 % ± 5 digits
Resistance
Range	600.0 Ω/6000 Ω
Resolution	0.1 Ω/1 Ω
Accuracy	1 % ± 5 digits
Continuity Beeper	30 Ω
Capacitance
Range	10.0 – 100.0 μF / 1000 μF
Resolution	0.1 μF/1 μF
Accuracy	1.9 % ± 2 digits
Mechanical Specifications
Size (L x W x H)	232 mm x 85 mm x 45 mm
Weight	370 g
Environmental Specifications
Operating Temperature	-10 °C to +50 °C
Storage Temp	-40 °C to +60 °C
Operating Humidity	Non condensing (< 10 °C) ≤ 90 % RH (at 10 °C to 30 °C) ≤ 75 % RH (at 30 °C to 40 °C) ≤ 45 % RH (at 40 °C to 50 °C) (Without Condensation)
Operating Altitude	3000 meters
Storage Altitude	12,000 meters
EMI, EMC	Meets all applicable requirements in EN61326-1:2006
Temperature Coefficients	Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C
Safety Compliance	ANSI/ISA S82.02.01:2004 CAN/CSA-C22.2 No. 61010-1-04 IEC/EN 61010-1:2001, 600V CAT III, 300V CAT IV Pollution Degree 2 EN/IEC 61010-2-32:2002 EN/IEC 61010-031:2002/A1:2008
Agency Approvals
Batteries	2 AA, NEDA 15A, IEC LR6